Shemax Build-In Dust Collector + Saeyang Marathon 3 + Kokoist Infinity Lamp Bundle

Dust Collector Operation and Maintenance

1. Turn on the dust collector.
2. Set the necessary operational speed.
3. Follow all safety and care instructions during operation.
4. Take breaks during work to clean the device.
   • Warning: Clean the filter after each session.
5. Always unplug the device before cleaning the filter.
6. Wear a mask and gloves.
7. Remove any remaining dust from the dust collector grid using a soft brush.
8. Remove the metal grid (attached with magnets) and place it on the table.
9. Prepare napkins (wet ones work best) and lay them on the table.
   • Remove the filter from the device and place the dirty part on the napkin. Tap the filter to shake off dust onto the napkin.
10. Turn the cleaned filter over and insert it back into the top of the housing.
11. Fold the used tissue and dispose of it.
    • Warning: Use only dry cleaning for the filter. Do not use water or other liquids. Replace the filter every 2 months.
12. Reattach the grid to the top of the device using the magnets.
13. To clean the metal grid, apply a disinfectant to a cloth and gently wipe the dust collector.
14. Use a dry tissue to thoroughly wipe the dust collector.
    • Warning: If not dried, the metal can develop corrosion. If corrosion occurs, use a buff to clean the metal.
15. Turn on the dust collector and connect it only to an AC outlet.
16. Never leave the dust collector unattended with the power cord plugged in.
17. Always unplug the device after use.
    • Warning: Only use accessories included in the delivery set. Violation of care instructions will void the warranty.

Take care of your SHEMAX, and it will take care of your health for many years!